Fortinet Network Router FORTIMAIL 5000 User Manual

FortiMail-4000  
© Copyright 2008 Fortinet Incorporated. All rights reserved.  
Products mentioned in this document are trademarks or registered trademarks  
of their respective holders.  
Regulatory Compliance  
FCC Class A Part 15 CSA/CUS  
9 September 2008  
06-30004-0333-20080909  
Checking the Package Contents  
Front  
Back  
Ethernet Cables:  
Orange - Crossover  
Grey - Straight-through  
UID  
Null-Modem Cable  
(RS-232)  
Power  
Connection  
Serial Connection  
Ethernet Connections  
Power Cable  
Connector  
Ports 1 and 2  
CONSOLE  
Type  
RJ-45  
DB-9  
Speed  
Protocol  
Description  
Connection to the network  
10/100Base-T Ethernet  
Q u i c k S t a r t G u i d e  
9600 bps  
RS-232 serial Connection to the management computer. Provides  
FortiMail-4000  
access to the command line interface (CLI).  
Copyright 2006 Fortinet Incorporated. All rights reserved.  
Trademarks  
Products mentioned in this document are trademarks.  
Documentation  
Connecting  
Connect the FortiMail unit to a power outlet and to the network hub or switch.  
Place the FortiMail unit on a stable surface The FortiMail-4000 requires 1.5 inches  
(3.75 cm) clearance on each side to allow for cooling.  
Alternatively, install the FortiMail-4000 in a 19-inch rack. The FortiMail-400 requires 2U  
of vertical space.  
UID  
Power  
Connection  
Make sure the power is not plugged into the wall before connecting the power cable to  
the FortiMail unit.  
Straight-through Ethernet cable connects  
to hub or switch on the network  
Null modem cable connects  
to serial port on management computer  
Once you connect the power cord to the FortiMail unit, plug the cord into the outlet.  
Planning the Configuration  
Gateway mode  
Transparent mode  
In Gateway mode, the FortiMail unit protects your email server by scanning the SMTP traffic  
In Transparent mode, the FortiMail unit protects your email server by scanning the SMTP  
for viruses and spam messages as it passes through the FortiMail unit.  
traffic for viruses and spam messages as it passes through the FortiMail unit.  
You can configure your firewall or DNS server to ensure that incoming SMTP traffic goes  
through the FortiMail unit before reaching the email server. Optionally, you can configure the  
email server to use the FortiMail unit as the relay server for outgoing SMTP traffic.  
The FortiMail unit provides seamless integration into existing networks. You can place the  
FortiMail unit in front of the existing email server without any configuration changes to the  
existing network topology, for filtering email messages. This means that all of the FortiMail  
interfaces are on the same IP subnet and appears to other devices as a bridge. Alternatively,  
you can configure the FortiMail unit as a combination of a bridge and a router by assigning  
IP addresses to some of its interfaces. In this situation, the interfaces can be on different  
subnets.  
The FortiMail unit integrates into your existing network with only minor changes to your  
network configuration.  
Server mode  
In Server mode, the FortiMail unit provides basic email server functionality, supporting  
WebMail, SMTP, POP3 and IMAP email protocols. In addition, the FortiMail Server provides  
antivirus, antispam, email archiving, logging and reporting services.  
 

Euro Pro Vacuum Cleaner UV647H User Manual
Extron electronic Music Mixer MIX 301 User Manual
Franke Consumer Products Range FDF 9174 I User Manual
Fujitsu Air Conditioner AOU36CLX1 User Manual
Fujitsu Printer FTP 641MCL351 User Manual
Fujitsu Video Game Console ABO22 User Manual
Furuno Radar Detector FAR 21x7 BB Series User Manual
Gemini Turntable XL 300 User Manual
GE Washer Dryer GTUN275 User Manual
Giant Bicycle CYPHER 2 User Manual